Troubleshooting electrical issues after house rewiring

House rewiring is a crucial maintenance task that ensures the safety and functionality of your electrical system. Over time, wiring can deteriorate or become outdated, posing significant risks such as electrical fires and shocks. After a successful house rewiring project, you may expect your electrical system to work flawlessly. However, it’s not uncommon to encounter electrical issues even after rewiring. In this article, we will explore common problems that may arise post-rewiring and provide troubleshooting tips to address them.

Outlet and Switch Malfunctions

One of the most common issues homeowners face after rewiring is outlet and switch malfunctions. If you notice that some outlets or switches are not working, follow these steps:

  1. Check the Circuit Breaker: Begin by inspecting the circuit breaker panel. Sometimes, the issue is as simple as a tripped breaker. Reset any tripped breakers and test the outlets/switches.
  2. GFCI Outlets: Many modern homes have Ground Fault Circuit Interrupter (GFCI) outlets in areas like kitchens and bathrooms. If an outlet isn’t working, it might be connected to a tripped GFCI outlet. Locate the GFCI outlet and reset it.
  3. Inspect Wiring Connections: If the circuit breaker and GFCI outlets seem fine, the problem may lie in the wiring connections. Check the outlets/switches for loose or disconnected wires. If found, turn off the power to that circuit and reattach or tighten the connections.

Flickering Lights

Flickering lights can be frustrating and could indicate various issues, such as poor connections, faulty fixtures, or voltage fluctuations. Here’s how to troubleshoot flickering lights:

  1. Check Bulbs and Fixtures: Sometimes, flickering lights are due to loose bulbs or faulty light fixtures. Tighten bulbs or replace fixtures as needed.
  2. Voltage Fluctuations: Voltage fluctuations can be more complex to address. Contact a qualified electrician to investigate and stabilize the voltage in your home.
  3. Poor Connections: Loose or corroded wiring connections can also cause flickering lights. Turn off the power to the affected circuit, check and tighten all connections, and consider using dielectric grease to prevent corrosion.

Circuit Overloads and Tripping Breakers

After rewiring, you may experience circuit overloads leading to tripped breakers. Here’s how to handle this issue:

  1. Identify Overloaded Circuits: Determine which circuit is overloading by examining the breaker that keeps tripping. Reduce the load on that circuit by unplugging or turning off some devices.
  2. Upgrade Circuits: If your electrical system is still struggling with overloads, consider upgrading the circuit to handle more current. Consult with an electrician for proper assessment and upgrade recommendations.
  3. Avoid Daisy Chaining: Avoid daisy-chaining multiple power strips or extension cords together, as this can overload circuits and lead to tripped breakers.

Noisy or Hot Outlets

Hot or noisy outlets are concerning as they can indicate electrical problems. Address this issue promptly:

  1. Unplug Devices: If an outlet feels hot, unplug any devices connected to it immediately. This could be a sign of an overloaded circuit or a faulty outlet.
  2. Call an Electrician: Hot or noisy outlets should not be taken lightly. Contact a licensed electrician to inspect and replace the outlet if necessary.

Inadequate Power Supply

If you find that some areas of your home have insufficient power, it could be due to wiring issues or circuit capacity. Follow these steps to troubleshoot:

  1. Check for Loose Connections: Loose wiring connections can reduce power supply to outlets and fixtures. Turn off the power to the affected circuit and inspect for loose or disconnected wires.
  2. Assess Circuit Capacity: Evaluate the capacity of the circuit in question. If it’s overloaded, consider redistributing the load to other circuits or installing additional circuits to handle the load.

Grounding Problems

Proper grounding is essential for electrical safety. If you suspect grounding issues after rewiring, address them with these steps:

  1. Test Outlets: Use a ground fault receptacle tester to check if outlets are properly grounded. If any are not, consult an electrician to rectify the grounding issue.
  2. Grounding Rod Inspection: If you have a ground rod installed, make sure it’s properly connected and not corroded. Replace it if necessary.
  3. Grounding Electrode System: In some cases, the grounding electrode system may need an upgrade. Contact a professional electrician to assess and enhance your grounding system.


House rewiring is a significant investment in your home’s safety and functionality. However, it’s crucial to be prepared for potential electrical issues that may arise even after rewiring. By following the troubleshooting tips mentioned in this guide, you can identify and address common electrical problems efficiently. While many issues can be resolved on your own, never hesitate to contact a licensed electrician for more complex problems or when safety is a concern. Regular maintenance and vigilance are key to ensuring your electrical system remains safe and reliable for years to come.


Share on facebook
Share on twitter
Share on linkedin

More Posts

Call Me Back

Request a Quote